La tua posizione:Casa > Prodotti > Igrostato >
  • NT 82-F

nome del prodotto:

Modello di prodotto:



Invia richiesta

  • Parametri

NT 82-F.jpg

NT 82-F
Switch difference¹+/-5% RH
Permissible air velocity15m/sec.
Contact typechange-over contact
Service life>50,000 cycles
Min. switching capacity 20VAC / DC 100mA
Max. switching capacity 250VAC, 5A / DC 20W

3-pole terminal for 2.5mm², clamping torque 0.5Nm max.:

rigid wire 2.5mm² (AWG 14); stranded wire² 1.5mm² (AWG 16)

Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 38mm
Weight approx. 60g
Fitting positionvariable
Operating/Storage temperature0 to +60°C (+32 to +140°F) / -40 to +60°C (-40 to +140°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20

¹ at 50% RH

² When connecting with stranded wires, wire end ferrules must be used.

Art. No. Contact breaker (NCSetting Range Operating Voltage
82HF0135 to 95% RH20VAC/DC, 250VAC

  • Caratteristiche

• Adjustable relative humidity

• Change-over contact

• High switching capacity

• Easily accessible terminals

• Clip fixing

  • Grafico della struttura


  • Applicazione

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact. Functionality: The temperature setting on the scale equals to the upper switch point, which means that the NC contact opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point, which means that the NC contact closes.

Casella dei commenti

Follow us : facebook Twitter Linkedin Pinterest GooglePlus