La tua posizione:Casa > Prodotti > Termostato >
  • Electronic Thermostat NT 75-F

nome del prodotto:Electronic Thermostat NT 75-F

Modello di prodotto:NT 75-F



Invia richiesta

  • Parametri

NT 75-F.jpg

Technical Data

NT 75-F
Switch temperature difference5K (-3/+2K tolerance)¹
sensor elementNTC
Contact typechange-over snap-action contact
service life >100,000 cycles
Max.switching caoacity10mA
Max. switching capacityNC: 250VAC, 10 (4) A
NO: 250VAC, 5 (2) A
Max.inrush currentAC 16A for 10 sec.
Connection4-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded² wire 2.5mm² (AWG 14)
Mountingclip for 35mm DIN rail, EN 60715
Casingplastic according to UL94 V-0, light grey
Fitting Positionvariable
Operating/Stirage temperature-20 to +60℃(-4 to +140℉)
Operating/Stirage humiditymax.90% RH (non-condensing)
Protection typeIP20

¹ If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal "N" (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.

² When connecting with wires, wire end ferrules must be used.

Art.No.Contact breaker(NC)Setting Range Operating Voltage
860050-20 to +60°C230VAC, 50/60Hz

  • Caratteristiche

• Adjustable temperature

• High switching capacity

• Small hysteresis

• Change-over contact

• Clip fixing

  • Grafico della struttura

Thermostat NT 75-F.jpg

Thermostat NT 75-F.jpg

  • Certificazione
  • Thermostat CE-EMC

    Thermostat CE-EMC

  • Thermostat CE-LVD

    Thermostat CE-LVD

  • Thermostat RoHS

    Thermostat RoHS

  • Thermostat RoHS

    Thermostat RoHS

  • Hygrostat NT 74-F Patent

    Hygrostat NT 74-F Patent

  • Applicazione

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact. Functionality: The temperature setting on the scale equals to the upper switch point, which means that the NC contact opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point, which means that the NC contact closes.

  • video

Casella dei commenti

Follow us : facebook Twitter Linkedin Pinterest GooglePlus