Prodotti
Contattaci
Termostato
La tua posizione:Casa > Prodotti > Termostato >
  • ZR 011-F

nome del prodotto:

Modello di prodotto:


Wechat:15088970667

WhatsApp:008615088970667

Invia richiesta

  • Parametri

ZR 011-F.jpg

ZR 011-F
Switch temperature difference+/-5°C
Sensor elementthermostatic bimeta
Contact typesnap-action contact
Service life> 100,000 cycles
Max. switching capacity250VAC, 10 (2) A / 120VAC 15(2)A, DC30W
Max. inrush currentAC 16A for 10 sec.
Connection4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)
stranded wire¹ 1.5mm² (AWG 16)
Mountingclip for 35mm DIN rail, EN 60715
Casingplastic according to UL94 V-0, light grey
Dimensions67 x 50 x 46mm
Weightapprox. 90g
Fitting positionvariable
Operating/Storage temperature-45 to +80°C (-49 to +176°F)
Operating/Storage humiditymax. 90% RH (non-condensing)
Protection typeIP20

¹ When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Art. No. Setting rangeSetting range
01172.0-00-FContact breaker (NC) 0 to +60°CContact maker (NO) 0 to +60°C
01172.0-01-FContact breaker (NC) +32 to 140°FContact maker (NO) +32 to 140°F
01175.0-00-FContact breaker (NC) 10 to +50°CContact maker (NO) +20 to +80°C
01175.0-01-FContact breaker (NC) +14 to 122°FContact maker (NO) +68 to +176°F
01176.0-00-FContact maker (NO) 0 to +60°CContact maker (NO) 0 to +60°C
01176.0-01-FContact maker (NO) +32 to 140°FContact maker (NO) +32 to 140°F


  • Caratteristiche

> NO and NC in one casing

> Separate adjustable temperatures

> High switching capacity

> Terminals easily accessible

> Clip fixing

  • Grafico della struttura

1.jpg

  • Applicazione

Two thermostats in one casing:

Thermostat (contact breaker, normally closed) for regulating heaters. The contact opens when temperature is rising.

Thermostat (contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded. The contact closes when temperature is rising.

Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.

Casella dei commenti



sinqury
Follow us : facebook Twitter Linkedin Pinterest GooglePlus